GL-LAB12-2.3 Sealed Lead Acid (SLA) Rechargeable Battery 12V 2.3A

Product introduction

12V 2.3Amp Sealed Lead Acid (SLA) Rechargeable Battery
GL Part no.
GL-LAB12-2.3
Voltage
12.0V
Nominal Capacity
2.3 Ah
Chemistry
Sealed Lead Acid (SLA)
Type of electrolyte
AGM Non-spillable
Nominal Capacity 25℃(77℉)
20-hr. (0.120A to 9.60V): 2.40 AH 5-hr. (0.380A to 9.60V): 1.90 AH 1-hr. (1.495A to 9.60V) : 1.50 AH 0.5-hr. (2.540A to 9.60V) : 1.27 AH
Self-discharge 25℃(77℉)
1 month: 97% left 3 months: 91% left 6 months: 85% left 12 months: 64% left
Max Charge Current
0.575A(0.25CA)
Max Discharge Current
23.0A(10CA)
Max Short Duration Discharge Current
34.5A(15CA)
Charging
Float Charging: 13.65±0.15V, 0.6A(0.3CA) at 25℃(77℉)
Operation Temperature Range
Charge:-10~40℃(14~104℉) Discharge:-20~50℃(-4~122℉)
Expected Life
5 years at 25℃(77℉)
Dimensions
7.17 x 2.43 x 0.93 in (182.0 x 61.7 x 23.7 mm)
Weight
25.40 oz (720.0 g)

Special Features

Application:
☆ Broadcast television systems
☆ Telecom and UPS systems
☆ Communication back-up systems
☆ Solar storage power systems
☆ Power systems
☆ Forklift, elevator systems
Stabilities:
☆ Positive, negative’s plates are all Calcium-Lead alloy.
☆ The plastic material is fire-resistance ABS or same grade of UL 94V-o L.O.I >28%
Polarities:
☆ The polarities adopted Antimony-Lead alloy or copper alloy covered with Lead material.
Seal construction:
☆ Non-spillable, no leaking danger, the gas escape rate is low , no need to replenish water, can avoid acid lack or crystallization problem during discharge, the recombination rate is high than 98%
☆ The electrolyte can be absorbed by separator, the gravity of acid:1.295(25℃

Note:
☆☆ Please check your terminal type before ordering.
☆☆ More infromation upon request.